04 OCT 2016  |  CLOSED ON: 14 AUG 2017  |  REWARD: INR 1,00,000/-
Reward money is paid in exchange of legally acquiring the solution, implementing it to solve the problem and meeting the success criteria. Milestones for paying the reward money would depend upon the complexity of challenge and maturity of the proposed solution, which would be discussed with the solver as soon as the proposed solution is selected by us.

14 AUG 2017

INR 1,00,000/-

We transport raw material by bulk cargo. Cargo is charged based on the in-motion weight of the cargo. We are interested in solutions that will allow us to accurately calculate cargo weight.

Challenge Details

Bulk cargo of coal and flux are dispatched regularly from ports to various destinations by different types of wagons. Different types of wagons have different chargeable weights, which is around 68 Metric Ton (MT) per wagon with a tolerance of maximum +2 MT. The Wagons are supposed to be loaded with the weight of 68MT+2MT (figure 1). It is not desired to load to a lesser capacity (<68MT>


In the past, wagons were loaded based on volume. Subsequently, in order to deal with the above problem, loaders were fitted with load cells (figure 2) to measure the weight of material at the time of loading the wagon. Surveyors were deployed to monitor the load cell reading. Usage of load cells on loaders is not solving the problem as there are variations between the load cell measurement and In-motion weigh bridge measurement (figure 3).

In view of the present situation, and to increase the efficiency in wagon loading, it is desired to have a wagon scanning system to measure its gross weight. This scanning system can scan a loaded wagon at the loading point and determine the gross weight of the wagon (Material weight + Wagon weight).  It is important to note that there are various types of wagons and there are various types of materials that are loaded on these wagons.

Critical Success Factors/ Measures:

By implementing the scanning system there should be zero wagons beyond the maximum allowable gross weight of the wagon.

In case of a mismatch with IMWB weighing system, the same should be contestable with the implemented new solution.

Have any query or need more clarification about this challenge?